机务在线

搜索
查看: 4425|回复: 9

[22自动飞行] RVSM运行的要求在哪个手册上可以查到

[复制链接]

3

主题

13

帖子

418

积分

机务学徒工

Rank: 3Rank: 3

积分
418

实名认证

发表于 2016-4-29 20:46:06 | 显示全部楼层 |阅读模式 来自: 中国浙江
比如惯导上的高度指示差的要求
回复

使用道具 举报

3

主题

13

帖子

418

积分

机务学徒工

Rank: 3Rank: 3

积分
418

实名认证

 楼主| 发表于 2016-5-3 13:18:48 | 显示全部楼层 来自: 中国浙江
有人知道么
回复 支持 反对

使用道具 举报

57

主题

464

帖子

304

积分

元老

Rank: 13Rank: 13Rank: 13Rank: 13

积分
304

四川航空

发表于 2016-5-3 18:20:04 | 显示全部楼层 来自: 中国四川成都
一般在自己公司的运行规范里面有,或者有单独的RVSM运行手册,再或者在相应特殊运行手册里面,不同公司可能有所不同
心如磐石,形如水~!!!
回复 支持 反对

使用道具 举报

3

主题

13

帖子

418

积分

机务学徒工

Rank: 3Rank: 3

积分
418

实名认证

 楼主| 发表于 2016-5-4 21:53:35 | 显示全部楼层 来自: 中国浙江杭州
鱼的后脚 发表于 2016-5-3 18:20
一般在自己公司的运行规范里面有,或者有单独的RVSM运行手册,再或者在相应特殊运行手册里面,不同公司可能 ...

如果在amm手册上找能找到么
回复 支持 反对

使用道具 举报

0

主题

49

帖子

0

积分

试用期机务

Rank: 1

积分
0
发表于 2016-5-5 15:39:03 | 显示全部楼层 来自: 中国天津
航空公司的运行手册有吧,特殊运行属于
回复 支持 反对

使用道具 举报

9

主题

41

帖子

49

积分

试用期机务

Rank: 1

积分
49

东航中国民航大学

发表于 2016-5-11 22:35:09 | 显示全部楼层 来自: 中国陕西西安
在ATA05或者ATA34看看动静压那一块能不能找到。RVSM检查涉及动静压检查方面滴
回复 支持 反对

使用道具 举报

26

主题

495

帖子

795

积分

机务正式工-无执照

Rank: 4

积分
795

中国民航大学东航

发表于 2016-5-12 07:30:57 | 显示全部楼层 来自: 中国上海
问下放行的,放行考试必考
回复 支持 反对

使用道具 举报

2

主题

194

帖子

127

积分

见习机务员

Rank: 2

积分
127
发表于 2016-10-13 13:28:26 | 显示全部楼层 来自: 中国广东东莞
AMM手册里面都有
回复 支持 反对

使用道具 举报

0

主题

35

帖子

128

积分

见习机务员

Rank: 2

积分
128
发表于 2016-10-13 19:04:17 | 显示全部楼层 来自: 中国陕西西安
你可以去FAA网站上查AC。。
回复 支持 反对

使用道具 举报

0

主题

35

帖子

128

积分

见习机务员

Rank: 2

积分
128
发表于 2016-10-13 19:05:35 | 显示全部楼层 来自: 中国陕西西安
APPENDIX 4. ALTIMETRY SYSTEM PERFORMANCE
REQUIREMENTS FOR OPERATIONS IN RVSM AIRSPACE
(Note.— See Chapter 7, 7.2.5)
1. In respect of groups of aeroplanes that are nominally of identical design and build with respect to all details that could
influence the accuracy of height-keeping performance, the height-keeping performance capability shall be such that the total
vertical error (TVE) for the group of aeroplanes shall have a mean no greater than 25 m (80 ft) in magnitude and shall have a
standard deviation no greater than 28 – 0.013z2
for 0 ≤ z ≤ 25 when z is the magnitude of the mean TVE in metres, or
92 – 0.004z2
for 0 ≤ z ≤ 80 where z is in feet. In addition, the components of TVE shall have the following characteristics:
a) the mean altimetry system error (ASE) of the group shall not exceed 25 m (80 ft) in magnitude;
b) the sum of the absolute value of the mean ASE and of three standard deviations of ASE shall not exceed 75 m (245 ft);
and
c) the differences between cleared flight level and the indicated pressure altitude actually flown shall be symmetric about
a mean of 0 m, with a standard deviation no greater than 13.3 m (43.7 ft), and in addition, the decrease in the frequency
of differences with increasing difference magnitude shall be at least exponential.
2. In respect of aeroplanes for which the characteristics of the airframe and altimetry system fit are unique and so cannot
be classified as belonging to a group of aeroplanes encompassed by paragraph 1, the height-keeping performance capability
shall be such that the components of the TVE of the aeroplane have the following characteristics:
a) the ASE of the aeroplane shall not exceed 60 m (200 ft) in magnitude under all flight conditions; and
b) the differences between the cleared flight level and the indicated pressure altitude actually flown shall be symmetric
about a mean of 0 m, with a standard deviation no greater than 13.3 m (43.7 ft), and in addition, the decrease in the
frequency of differences with increasing difference magnitude shall be at least exponential.
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

快速回复 返回顶部 返回列表