怎么查FIM手册

snow1329 · 发表于 2007-5-15 09:42:32

FIM手册前面的FAULT CODE INDEX 利用这个怎么找不到呀那为说一下怎么查FIM手册吧

墨子剑 · 发表于 2007-5-15 16:33:22

Types of Faults
A. Observed Faults
   Observed faults are the problem symptoms sensed by the flights crew or the maintenance crew. These are the types of observed faults:
(a) Faults that are shown on the pilot’s panels and displays:
1) Fault lights
2) Failure and alert flags
3) Alert messages
4) Indicated values that are not normal.
(b) Flight crew observations in the flight compartment or during walk-around
(c) Servicing crew observations
(d) Ground maintenance crew observations
可以观察到的故障列表在手册/ FM /Front Matter/Observed Fault LIST，可以找到隔离程序具体位置。
B. Cabin Faults
      Cabin faults are the problems symptoms which can occur with the systems and equipment in the passenger cabin. The Cabin Fault List is divided into sections by system. These are the cabin systems:
(a) Communications/Public Address
(b) Doors/Windows
(c) Emergency Equipment
(d) Galleys
(e) In-Flight Entertainment
(f) Lights
(g) Miscellaneous
(h) Seats
(i) Toilets/Lavatories
Cabin故障列表在手册/ FM /Front Matter/ Cabin Fault LIST，可以找到隔离程序具体位置。
C. Maintenance Messages
(1) Maintenance messages are the fault indications that you get from the built-in test BITE feature of a system or individual component. They help you find the cause of an observed fault. These are maintenance messages:
(a) A specific light or lights
(b) An alphanumeric code
(c) A group of English words with or without an associated numeric code.
(2) Most BITE tests are performed at the front panel of components in the electronic equipment bay.Some BITE is performed in the flight compartment.
(3) The control display units (CDUs) are in the flight compartment. You can access the BITE for several airplane systems through a CDU.
   在具体每一章的都有一个FAULT CODE INDEX，对应具体位置，就是自检获得的代码。
说明：在具体排故障中，有以上三者之一都可以来排故障。

cauc_dong · 发表于 2007-6-4 23:52:15

手册前面front matter里面有详细介绍

zouqingkai · 发表于 2007-6-10 18:55:59

资料库中有过介绍，去找一下。

帐号		自动登录	找回密码
密码			立即注册

[通用经验] 怎么查FIM手册

南航

中国民航大学