[标准施工] 基本技能考试自己整理的笔记资料-标准线路施工

标准线路施工
（一）接线片的压接与安装 terminal
例题：接线片 BACT12AC () 导线：W152—018—20
测得螺栓孔的直径: 8 英寸
1根据导线编号查询代码WDM手册
2查件号 ASSEMBLY OF INSULATED AND UNINSULATED TERMINAL LUGS
SWPM—20—30—11—1B
1. PART NUMBERS AND DESCRIPTION
1B. BACT12AC General Purpose Terminal Lugs

22 – 18 7 24 Red 8 BACT12AC49
可替换件：


3压接工具 ASSEMBLY OF INSULATED AND UNINSULATED TERMINAL LUGS
SWPM—20—30—11—2D
2. ASSEMBLY OF TERMINAL LUGS
2D. Assembly of BACT12AC Terminal Lugs
4剥线工具 WIRE INSULATION REMOVAL
SWPM—20—00—15—3B
3. CABLE JACKET AND WIRE INSULATION REMOVAL TOOLS
3B. Wire Insulation Removal Tools

查找ST2222-40可替代的工具件号
SWPM—20—00—15—3C
C. Insulation Removal Tool Supplier Part Numbers
（二）接线管的安装 splice ASSEMBLY OF SPLICES
1 接线管的件号 SWPM—20—30—12——3B
3. PART NUMBERS AND DESCRIPTION
3B. Insulated Butt Splices
无可替代件
2 剥线工具 WIRE INSULATION REMOVAL
SWPM—20—00—15—3B
3. CABLE JACKET AND WIRE INSULATION REMOVAL TOOLS
3B. Wire Insulation Removal Tools

查找ST2222-40可替代的工具件号
SWPM—20—00—15—3C
C. Insulation Removal Tool Supplier Part Numbers
3 压接工具 ASSEMBLY OF SPLICESa
SWPM—20—30—12——4A
4. TOOLS AND MATERIALS
4A. Conductor Splice Crimp Tools





(三）插头插座 例子：D41795P B-2816
设备清单——中国南方航空公司——757——WDM手册
D41795P 1 BACC45FT20A39P PLUG 286N2631 81205 1 27-21-12
确定：20—39 BACC45FT20A39P
注意:看清楚插头还是插座，很关键！！慎重！！！
1件号：MIL-C-26500 FRONT RELEASE CONNECTORS
SWPM—20—61—11——2C
2. BOEING STANDARD CONNECTOR PART NUMBER AND DESCRIPTION
2C. BACC45FN and BACC45FT Bayonet Coupled Connector




2插入构型 MIL-C-26500 FRONT RELEASE CONNECTORS
SWPM—20—61—11——5A
5. INSERT CONFIGURATIONS
5A. MIL-C-26500 Type Connectors
类型：20—39
3插钉件号 MIL-C-26500 FRONT RELEASE CONNECTORS
SWPM—20—61—11——4C
4. CONTACT PART NUMBERS AND DESCRIPTION
4C. Standard Contacts



注意：选择钉子类型需要看插头插座的型号如果是“S”选择socket 如果是“P”选择pin
可替代的钉子件号：

4剥线长度
SWPM—20—61—11——7A
7. WIRE PREPARATION
7 A. Wire Preparation

5插钉压接工具
SWPM—20—61—11——8A
8. CONTACT ASSEMBLY

8A. Selection of a Crimp Tool

6送钉工具
SWPM—20—61—11——11A
11. CONTACT INSERTION
11A. Contact Insertion

7退订工具
SWPM—20—61—11——6C
6. CONNECTOR DISASSEMBLY
6C. Contact Removal




（四）发动机线束捆扎 WIRING ASSEMBLY AND INSTALLATION CONFIGURATION
SWPM—20—10—11——3D
3. APPLICABLE CONDITIONS FOR WIRE HARNESS ASSEMBLY
3D. Wire Harness Ties in a High Vibration Area
1捆扎标准流程
D. Wire Harness Ties in a High Vibration Area
The conditions in this paragraph apply only to the outer wire harness ties on the harness.
For the locations of the high vibration areas, refer to Subject 20-02-30.
、
、
、
、
、
2捆扎方法
SWPM—20—10—11——4D
4. ASSEMBLY OF WIRE HARNESS TIES
4D. Assembly of a Lacing Tape Wire Harness Tie - High Vibration Area

D. Assembly of a Lacing Tape Wire Harness Tie - High Vibration Area
For the conditions that are applicable for this procedure, refer to Paragraph 4.B.
、、
、、
、、
、、
、、

3捆扎材料
SWPM—20—10—11——4A
4. ASSEMBLY OF WIRE HARNESS TIES
4A. Wire Harness Tie Materials