[B787] 787机轮培训教材（787 Wheels training）

GENERAL INSTRUCTIONS
Hygiene and safety
Always wear safety shoes, gloves and eyes protection equipment
Work on a clean, soft and flat surface. A smooth rubber surface is recommended
Before the use of the chemicals referred to in this presentation, carefully read and
obey instructions on each chemical container and on the material safety data sheet
Handling
Use appropriate tools to handle wheels and brakes
Warning and caution
WARNING statements given to prevent personal injury are not exhaustive
CAUTION statements given to prevent damage to equipment are not exhaustive
This training document is only for training purposes. It covers
maintenance first level (brake servicing and heat sink replacement)
This documentation is based on CMM and practical experience of aircrafts
operators
It must not be used as reference maintenance manual or as a job card but
as a reminder of the training course.
CMM, SB and SL are the only reference documents for wheels and brakes
maintenance.
In this presentation SRP means Standard Repair Practices Manual
(Reference 32-09-01)

ELECTRICAL HARNESS TRAINING
AGENDA :
1/ Documentation overview
2/ Main wheel design
3/ Main wheel - Maintenance plan
Tire change
Disassembly
Cleaning
Inspection
Every 5th / 7th cycle
Overhaul
On condition
Assembly
4/ Nose wheel design
5/ Nose wheel - Maintenance plan