请问跳开关更换的步骤和依据

amoy_wind · 发表于 2011-7-22 09:43:26

有时排故需要更换跳开关，请问有没有什么依据和步骤？？

chenawei · 发表于 2011-7-22 11:19:31

空客的依据就是TSM 手册
步骤就是查ESPM
波音的依据是FIM手册
步骤是SWPM手册

taiyang · 发表于 2011-7-24 12:02:15

Installation of a Terminal on a Circuit Breaker
Refer to Figure 6.
NOTE: When a terminal, with a hole that is larger than the hole of the circuit
breaker terminal, is attached to a circuit breaker:
- An AN960 pressure washer is installed between the terminal and the
lock washer
- The AN960 pressure washer has a hole that is the same size as the
hole of the circuit breaker terminal; for example, an AN960-8
pressure washer is used when a size 10 terminal is attached to size
8 circuit breaker terminal.

cauc987 · 发表于 2011-8-9 12:49:00

看了楼主的帖子,不由得精神为之一振

[s:203]

pang1210 · 发表于 2011-8-9 13:17:26

支持二楼，以后跟帖就应该查查手册把标准给大家发出来，赞一个！

隐形的翅膀 · 发表于 2011-8-9 14:26:07

FIM有吗

m34275835 · 发表于 2011-8-9 20:36:41

The AN960 pressure washer has a hole that is the same size as the
hole of the circuit breaker terminal; for example, an AN960-8
pressure washer is used when a size 10 terminal is attached to size
8 circuit breaker terminal.