CFM56-3 structure

yuanchen_jc · 发表于 2010-5-15 19:13:41

CFM56-3 structure 希望对大家有用

CFM56-3 Familiarization Training Manual MTUMaintenance Zhuhai Co. Ltd.

Core Major Module

Purpose:
Provide the energy to drive the LPT
Components:
The core major module consists of eight maintenance modules as follows: HPC rotor, HPC front stator, HPC
rear stator, combustion case, combustion chamber, HPT nozzle, HPT rotor, HPT shroud and first stage LPT
nozzle.
Description:
HPC rotor is a nine stage, high speed, unitized spool-disk structure. The rotor consists of five major parts: the
front shaft, the 1st and 2nd stage spool, the third stage disk, the 4th through 9th stage spool and the compressor
rear (CDP) seal.
HPC front stator, consists of: front casing halves, extension casing halves (configuration 1), IGV’s and first 5
stages of stator vanes. The IGV’s and the 1st through 3rd stage vanes are variable, the 4th and 5th stage vanes
are fixed. The
HPC rear stator consists of: rear casing halves, liners (Configuration 1), three stages of fixed vanes, and vane
shrouds. The rear stator is located inside the front stator extension and is cantilever-mounted to the rear stator
support. The rear stator support outer flange is mounted between the compressor front stator extension and the
combustion case.
Combustion case is a fabricated structural weldment located between the HPC and the LPT. It provides
structural interface, transmits engine axial loads, and provides gas flow path between the compressor and the
LPT.
Combustion chamber contained in the combustion case, consists of outer and inner cowls, 20 primary and 20
secondary swirl nozzles, dome, and outer and inner liners..................................................

pvg_01 · 发表于 2010-5-18 15:51:40

现在资料越来越全了啊

jianglei105 · 发表于 2010-8-1 11:05:36

实习看的最多的就是cfm56-3

cdq888 · 发表于 2010-8-20 12:11:57

帮楼主撑撑啊！

唐伯猫 · 发表于 2010-8-21 16:25:58

还没看内容，应该还不错

hjh · 发表于 2010-11-26 21:53:41

现在资料越来越全了啊

abdelazize · 发表于 2011-1-6 07:00:46

thank you

[s:235][s:235][s:235]

liuk5 · 发表于 2011-1-6 07:12:42

很不错的哦快来吧

stsg666 · 发表于 2011-1-7 16:54:39

楼主辛苦

ekinwongsong · 发表于 2011-1-7 17:06:32

楼主辛苦

ccss97ja · 发表于 2011-1-17 03:57:25

不错.支持............呵呵``

jaspertseng · 发表于 2011-1-17 12:39:42

看的最多的就是cfm56-3 !学习啦，谢谢分享 ~

大鸟 · 发表于 2011-4-30 10:38:32

很不错的哦快来吧

xg649630803 · 发表于 2011-5-7 00:00:37

直接上传，翻译更好

集隼 · 发表于 2011-6-15 09:48:37

缺的就是这个!

aureate · 发表于 2011-7-7 13:12:50

有没有讲结构受力分析的？

ranndy · 发表于 2011-9-19 20:05:24

直接上传，翻译更好

列兵88 · 发表于 2011-9-19 23:23:31

楼主辛苦

yubg320 · 发表于 2011-10-5 10:06:17

好资料！多谢楼主共享！

janson@su · 发表于 2012-9-13 21:12:10

内容，应该还不错

gssali · 发表于 2014-3-14 19:00:23

这个做受力分析的理论基础不错~

254724788 · 发表于 2014-9-24 21:06:42

越来越全了

wanglb_09 · 发表于 2014-9-24 22:04:05

楼主辛苦

内容来自[触屏版]

竹君子 · 发表于 2014-9-25 12:08:17

发动机知识刷屏啊

帐号		自动登录	找回密码
密码			立即注册

[CFM] CFM56-3 structure

新建文章1

浏览过的版块

实名认证

上海工程技术大学

山东航空

在线王

中国民航飞行学院

海航

中国民航大学

奥凯航空