机务在线

搜索
查看: 4338|回复: 0

AVTRON AERO T477W BONDING METER 毫欧表

[复制链接]

32

主题

78

帖子

508

积分

机务学徒工

Rank: 3Rank: 3

积分
508
发表于 2020-8-11 16:57:24 | 显示全部楼层 |阅读模式 来自: 中国江苏苏州
  • 价格
    面议万元   
  • 品牌
    AVTRON
  • 联系邮箱
  • 地址
  • 类别
    航空电子产品
  • 固定电话
    18501518861
杨先生:

① 预付定金均存在欺骗行为!
② 价格低廉、在更多信息里填写电话的要谨慎!
③ 若遇上疑似或确定为欺诈交易、网络诈骗等信息,请向本网站举报!

详细信息
The Model T477W Bonding Meter is a self-contained AC resistance meter specifically designed to test very low resistance electrical bonds.
Ideal for aircraft system bonding testing. The unit is contained in a protective carrying case complete with the C22161 pistol grip probe set, battery charger, and operator’s manual. Power is obtained from a rechargeable battery pack. Battery capacity is adequate for eight (8) hours of continuous operation. Power is conserved by a 52 second timer which automatically powers down the display. Operation and display are initiated by depressing the TEST button. Built-in display illumination provides for use at nighttime or with inadequate ambient light. These features allow high accuracy and simplified set-up.
The low voltage and current output will not cause ignition of flammable gas, as certified by Underwriters Laboratories per UL 913, standard entitled “Intrinsically Safe Apparatus and Associated Apparatus, for use in Class I, II, and III, Division I Hazardous Installation.” The meter is approved for use in Class I, Groups A, B, C, or D, which includes hydrogen and gasoline flammable vapors. The Model T477W Bonding Meter is designed to accurately measure resistance, less than 2.0 ohms, as required by electrical bonds. The unit is approved for use in hazardous environments
such as around aircraft, fuel installations, fuel cells, and gas systems. Four resistance ranges are provided for measurement sensitivity. These are 2, 20, 200 and 2000 milliohms full scale. Operation of the TEST button automatically changes the range to the next highest range each time it is depressed. Continued operations of
the TEST button re-cycle the range changes. Resistance measurements are made using a pistol grip probe
connection. The pistol grip probe set (P/N C22161) is easy to use with convenient pistol grips for firm control and needle points for sure penetration of surface coatings. This probe set is also easy to use in tight areas such as around wing tanks.




46693291
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

快速回复 返回顶部 返回列表