[56窗户] 快速更换2号风挡—一次航前更换2号风挡的经验

AMM SUBTASK56-12-11-210-030
(6)Examine the windshield for its electrical resistance.
(a) For windshields that are new, examine the corner ofthe windshield near the bus bar terminalfor the window resistance code.
1) Record the window resistance code.
NOTE: The windowresistance code is located on a clear decal with black markings. This code may be covered when the windowis installed. It is necessary to know this code when you connect the windowheat wiring.
NOTE: Forwindshields that are new, the window resistance check is not necessary.
(b) When a used windshield is installed, do this task:Check the Electrical Resistance of theWindow Heat Film.
TASK 30-41-21-000-801
1) Record the window resistance code.
NOTE: It is possiblefor the window resistance to change with time.
(c) For new windshields that do not have the resistancecode on the corner of the windshield,do this task: Check the Electrical Resistance of the Window Heat Film,
TASK 30-41-21-000-801.
1) Record the window resistance code.
NOTE: This code isnecessary to determine the terminal board tap that matches the resistance measured on theconnector terminal.

ryn_82:2号活动风挡关键是要从旧的上倒传感器和线麻烦，如果航材有提前都组装好的就容易多了。 (2015-10-28 19:57)

ryn_82:2号活动风挡关键是要从旧的上倒传感器和线麻烦，如果航材有提前都组装好的就容易多了。 (2015-10-28 19:57)