机务在线

搜索
查看: 94|回复: 8

[21空调] A320这个最大正压差和负压差

[复制链接]

2

主题

5

帖子

1

积分

试用期机务

Rank: 1

积分
1
发表于 7 小时前 | 显示全部楼层 |阅读模式 来自: 中国江苏南通

各位大哥,A320这个最大正压差和负压差在哪个手册里面?有出处吗?请教一下!
回复

使用道具 举报

2

主题

5

帖子

1

积分

试用期机务

Rank: 1

积分
1
 楼主| 发表于 7 小时前 | 显示全部楼层 来自: 中国江苏南通
谁知道啊?
回复

使用道具 举报

0

主题

394

帖子

339

积分

机务学徒工

Rank: 3Rank: 3

积分
339
发表于 6 小时前 | 显示全部楼层 来自: 中国山东济南
The safety valves 6HL (7HL) are poppet-type pneumatic valves. They have a valve part and a control part in a housing. The valve part has a cap with a filter, a diaphragm, a pedestal and a bellmouth. The control part has a position switch, a negative delta-P check-valve and a controller. The position switch is connected electrically to the System Data Aquisition Concentrators (SDACs). The negative delta-P check-valve opens if the external pressure is higher than the internal pressure. The controller has a diaphragm, a poppet and springs to preload the poppet. The poppet gives accurate limit control. If the internal pressure is more than the design goal of 8.6 psi (0.5929 bar) above the external pressure, the poppet moves and air flows out of the fuselage. For negative delta-P condition it is ensured by a minimum of one safety valve operating, that the internal pressure is not more than 0.175 psi (0.0121 bar) below the external pressure.
tacoxu
回复 支持 反对

使用道具 举报

0

主题

2

帖子

0

积分

试用期机务

Rank: 1

积分
0
发表于 5 小时前 来自手机 | 显示全部楼层 来自: 中国江苏
飞FLY 发表于 2026-05-22 10:28
The safety valves 6HL (7HL) are poppet-type pneumatic valves. They have a valve part and a control part in a housing. The valve part has a cap with a filter, a diaphragm, a pedestal and a bellmouth. The control part has a position switch, a negative delta-P check-valve and a controller. The position switch is connected electrically to the System Data Aquisition Concentrators (SDACs). The negative delta-P check-valve opens if the external pressure is higher than the internal pressure. The controller has a diaphragm, a poppet and springs to preload the poppet. The poppet gives accurate limit control. If the internal pressure is more than the design goal of 8.6 psi (0.5929 bar) above the external pressure, the poppet moves and air flows out of the fuselage. For negative delta-P condition it is ensured by a minimum of one safety valve operating, that the internal pressure is not more than 0.175 psi (0.0121 bar) below the external pressure.

兄弟,最大正压差9.0在哪里
回复 支持 反对

使用道具 举报

0

主题

394

帖子

339

积分

机务学徒工

Rank: 3Rank: 3

积分
339
发表于 3 小时前 | 显示全部楼层 来自: 中国山东济南
AMM
2026-05-22_132515.jpg
tacoxu
回复

使用道具 举报

0

主题

394

帖子

339

积分

机务学徒工

Rank: 3Rank: 3

积分
339
发表于 3 小时前 | 显示全部楼层 来自: 中国山东济南
AMM
2026-05-22_132515.jpg
tacoxu
回复

使用道具 举报

0

主题

394

帖子

339

积分

机务学徒工

Rank: 3Rank: 3

积分
339
发表于 3 小时前 | 显示全部楼层 来自: 中国山东济南
陪你长大,慢慢 发表于 2026-5-22 11:16
兄弟,最大正压差9.0在哪里

在手册里有,看下面的图
tacoxu
回复 支持 反对

使用道具 举报

0

主题

2

帖子

0

积分

试用期机务

Rank: 1

积分
0
发表于 1 小时前 来自手机 | 显示全部楼层 来自: 中国上海
飞FLY 发表于 2026-05-22 13:30
在手册里有,看下面的图

收到,万分感谢,文件号可以给吗?大哥
回复 支持 反对

使用道具 举报

1

主题

189

帖子

204

积分

见习机务员

Rank: 2

积分
204

海航

发表于 16 分钟前 | 显示全部楼层 来自: 中国贵州贵阳
陪你长大,慢慢 发表于 2026-5-22 15:20
收到,万分感谢,文件号可以给吗?大哥

老铁,你不是机务吧?
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

快速回复 返回顶部 返回列表