关于安装燃油箱步骤的一段资料，求助！
Finish positioning the Fuel Tank in the compartment by easing it into corners, the fitting throats, etc...Secure the rope fixations to the structure loops and apply the self gripping patches. Once installed, the Fuel Tank must not have any folds such as shown below.Connect the doors; coat the threads of each stud with molybdenum disulfide to make it easier to screw on the nuts. First screw all the nuts by hand then torque them to the recommended value with a torque them to the recommended value with a torque wrench.怎么翻译？
还有，对应的这幅图的 CLOSED FOLD UNACCEPTABLE 是什么意思？谢谢前辈！ 供参考
通过将油箱平铺到各个角落，及接座弯管位置等，完成油箱在隔舱内的放置。
将固定绳索到结构环上并安装自锁绷带。
一旦安装完成，油箱不能有下面所示的任何褶皱。
连接门 ；为了易于安装螺母，在每个螺栓的螺纹上涂刷一层二硫化钼（干性润滑剂）。
先用手拧紧所有的螺母然后使用扭力扳手将其磅紧到推荐的磅矩。
回 1楼(freetm) 的帖子
谢谢你 折叠后没缝隙是不可接受的，就是图中那里需要缝隙
页:
[1]