[EMB] E190原版教材MAINTENANCE TRAINING MANUAL

Copyright © 2009 by Embraer - Empresa Brasileira de Aeronáutica S.A. All rights reserved.
This document shall not be copied or reproduced in whole or in part, in any form or by any means without the express written
Authorization of Embraer. The information, technical data, designs and drawings disclosed in this document are proprietary
information of Embraer or third parties and shall not be used or disclosed to any third party without permission of Embraer.
Tech Docs, Acft Gen, ATAs – 05 to 12, 20
MAINTENANCE TRAINING MANUAL

July 2010 – Rev. 1

TABLE OF CONTENT
ABBREVIATIONS........................................................................................ 2
SERVICE BULLETINS and AIRWORTHINESS DIRECTIVES ................. 20
TECHNICAL DOCUMENTATION.............................................................. 36
INTRODUCTION ................................................................................ 36
AMM PART I - SYSTEM DESCRIPTION SYSTEM (SDS) ................ 38
AMM PART II - MAINTENANCE PRACTICES AND PROCEDURES
(MPP).................................................................................................. 40
MAINTENANCE PRACTICES AND PROCEDURES (MPP) ............. 42
AIRCRAFT MAINTENANCE TASK ORIENTED SUPPORT SYSTEM
(AMTOSS) .......................................................................................... 42
FUNCTION CODES ........................................................................... 42
AIRCRAFT MAINTENANCE MANUAL .............................................. 44
FAULT ISOLATION MANUAL (FIM) .................................................. 46
RAMP MAINTENANCE MANUAL (RMM).......................................... 48
COMPONENT MAINTENANCE MANUAL (CMM)............................. 48
WIRING MANUAL (WM) .................................................................... 50
SYSTEM SCHEMATIC MANUAL (SSM) ........................................... 50
AIRCRAFT ILLUSTRATED PARTS CATALOGUE (AIPC)................ 52
GENERAL........................................................................................... 52
OTHER DOCUMENTATION .............................................................. 54
AIRCRAFT RECOVERY MANUAL (ARM)......................................... 54
AIRPORT PLANNING MANUAL (APM)............................................. 54
CONSUMABLE PRODUCTS CATALOGUE (CPC)........................... 54
CORROSION PREVENTION MANUAL (CPM) ................................. 54
ILLUSTRATED TOOL AND EQUIPMENT MANUAL (ITEM) ............. 54
INSTRUCTIONS FOR GROUND FIRE EXTINGUISHING AND
RESCUE MANUAL (IGFER) .............................................................. 54
MAINTENANCE FACILITY & EQUIPMENT PLANNING (MFEP)...... 56
NONDESTRUCTIVE TESTING MANUAL (NDT)............................... 56
SERVICE BULLETIN (SB) ................................................................. 56
INFORMATION BULLETIN (IB) ......................................................... 56
STRUCTURAL REPAIR MANUAL (SRM) ......................................... 58
STANDARD WIRING PRACTICES MANUAL (SWPM)..................... 58
TASK CARD SYSTEM (TCS)............................................................. 58
AIRCRAFT GENERAL............................................................................... 62
INTRODUCTION ................................................................................ 62
AIRCRAFT GENERAL ....................................................................... 64
INTRODUCTION ................................................................................64
THE FUSELAGE AND CONDITIONING PACKS...............................68
COCKPIT AND CABIN SECTIONS....................................................72
THE LANDING GEAR.........................................................................74
EMB 190 TURNING RADIUS.............................................................78
ERJ 170 TURNING RADIUS..............................................................82
CF34-10E HIGH BYPASS TURBOFAN ENGINES............................84
CF34-8E HIGH BYPASS TURBOFAN ENGINES..............................86
THE EMBRAER EMB 190-100...........................................................88
THE EMBRAER EMB 190-200...........................................................88
THE EMBRAER ERJ 170 ...................................................................90
EMB 190 COMPOSITE STRUCTURE ...............................................92
ERJ 170 COMPOSITE STRUCTURE ................................................94
DIFFERENCES EMB 190-100 /190-200 ............................................96
TIME LIMITS AND MAINTENANCE CHECKS (05-00) ...........................100
INTRODUCTION ..............................................................................100
UNSCHEDULED MAINTENANCE CHECKS ...................................102
AIRCRAFT AREAS AND DIMENSIONS (06-00).....................................104
INTRODUCTION ..............................................................................104
AIRCRAFT AREAS AND DIMENSIONS ..........................................106
INTRODUCTION ..............................................................................106
THE AIRCRAFT MEASUREMENT EMBRAER 190-100 .................108
THE AIRCRAFT MEASUREMENT EMBRAER 190 - 200 ...............110
THE AIRCRAFT MEASUREMENT EMBRAER 170.........................112
THE AIRCRAFT MEASUREMENT EMBRAER 175.........................114
THE AIRCRAFT MEASUREMENT...................................................116
THE AIRCRAFT STATIONS EMBRAER 190...................................120
THE AIRCRAFT STATIONS EMBRAER 170...................................130
THE AIRCRAFT ZONING SYSTEM EMBRAER 190.......................138
THE AIRCRAFT ZONING SYSTEM EMBRAER 170.......................140
SUBZONES ......................................................................................142
ACCESS PANELS............................................................................144
LIFTING AND SHORING (07-00) ............................................................148
AIRCRAFT JACKING .......................................................................148
INTRODUCTION ..............................................................................148
COMPLETE AIRCRAFT JACKING ..................................................150
BEFORE COMPLETE AIRCRAFT JACKING...................................152
JACKING POINTS LOCATION.........................................................154
NOSE AND MAIN GEAR JACKING POINTS...................................156
LEVELING AND WEIGHING (08-00) ...................................................... 160
INTRODUCTION .............................................................................. 160
WEIGHING THE AIRCRAFT............................................................ 162
AIRCRAFT LEVELING ..................................................................... 164
TOWING AND TAXIING (09-00) ............................................................. 168
INTRODUCTION .............................................................................. 168
TOWING THE AIRCRAFT................................................................ 170
TOWING OPERATION..................................................................... 172
AIRCRAFT TOWING........................................................................ 174
TOWING REGULATIONS................................................................ 176
TAXI REGULATIONS....................................................................... 178
PARKING AND MOORING (10-00)......................................................... 182
INTRODUCTION .............................................................................. 182
MINIMUM DISTANCES.................................................................... 184
FOR NORMAL AIRCRAFT PARKING ............................................. 186
FOR NORMAL AIRCRAFT PARKING IN ICE OR SNOW............... 188
CONDITIONS ................................................................................... 188
LONG TERM PARKING................................................................... 190
MOORING THE AIRCRAFT............................................................. 192
PLACARDS AND MARKINGS (11-00).................................................... 196
INTRODUCTION .............................................................................. 196
SERVICING (12-00)................................................................................. 200
INTRODUCTION .............................................................................. 200
REPLENISHING............................................................................... 202
FUEL TANK SERVICING................................................................. 204
HYDRAULIC AND LANDING GEAR SYSTEM................................ 206
SERVICING...................................................................................... 206
ENGINE AND AUXILIARY POWER UNIT SERVICING .................. 208
SERVICING WATER/WASTE.......................................................... 210
GASEOUS SERVICING................................................................... 212
SCHEDULED SERVICING............................................................... 214
UNSCHEDULED SERVICING ......................................................... 216
AIRCRAFT MAINTENANCE SAFETY PROCEDURES (20-00) ............. 220
STANDARD PROCEDURES ........................................................... 220
TO RESTORE THE AIRCRAFT AFTER THE MAINTENANCE
PROCEDURE:.................................................................................. 226
MOUNTING TRAYS - REMOVAL / INSTALLATION ....................... 228
REMOVAL - INTERNAL................................................................... 228
INSTALLATION – INTERNAL .......................................................... 228
REMOVAL - EXTERNAL ..................................................................230
INSTALLATION ................................................................................230
ELECTRIC BONDING ......................................................................232
ELECTRICAL BONDING TEST........................................................234
TYPES OF ELECTRICAL BONDING AND THEIR SURFACE
PREPARATION ................................................................................236
METHODS (CONTINUED) ...............................................................240
ELECTRICAL BONDING PROTECTION - STANDARD
PROCEDURES.................................................................................246
GENERAL.........................................................................................246
ELECTROSTATIC DISCHARGE (ESD) - MAINTENANCE
PRACTICES......................................................................................250
GENERAL.........................................................................................250
SET-UP.............................................................................................250
ESDS DEVICES HANDLING............................................................252
JOB CLOSE-UP................................................................................252
STATIC GROUNDING - MAINTENANCE PRACTICES ..................254
GENERAL.........................................................................................254