[A320] A 319/320/321 快速放行指南

Quick Dispatch Guide

A. Electrical power supply

- To energize  the  aircraft electrical circuits external power: (Ref. TASK  24-41-00-861-002)

- To energize  the  aircraft electrical circuits APURef.  TASK  24-41-00-861-002)

- To de-energize the  aircraft electrical circuits external power: (Ref. TASK  24-41-00-862-002)

- To de-energize the  aircraft electrical circuits APU: (Ref. TASK  24-41-00-862-002)

B.  Hydraulic  power supply

- To pressurize the  Green hydraulic  system: (Ref. TASK  29-10-00-863-001)

- To pressurize the  Yellow hydraulic  system: (Ref. TASK  29-10-00-863-002)

- To pressurize the  Blue hydraulic  system ground power supply:(Ref. TASK  29-10-00-863-003)

- To pressurize the  Blue hydraulic  system electric pump:(Ref.  TASK  29-10-00-863-003)

- To depressurize the  Green hydraulic  system: (Ref. TASK  29-10-00-864-001)

C. Missing Fasteners

(1) To find the acceptance criteria related to missing fasteners
On fairings:
- For the wing-to-fuselage fairings and belly fairing access-panels: (Ref. TASK 53-35-00-200-002)
- For the belly fairing louver-panel vanes: (Ref. TASK 53-35-00-040-002)
- For the pylon fairing panels: (Ref. TASK 54-50-00-200-003)
- For the vertical stabilizer trailing-edge access-panels: (Ref. TASK55-33-00-200-001)

(2)  To find  the  acceptance criteria  related to  missing fasteners On  lining panels:

- For the  lower deck FWD  cargo-compartment: (Ref. TASK  25-54-12-300-001)

- For the  lower deck aft cargo-compartment: (Ref. TASK  25-55-11-300-001)

- For the  lower deck bulk cargo-compartment: (Ref. TASK  25-55-12-300-001)

- For the  ACT  integrated impact wall  (If installed): (Ref. TASK  28-28-00-200-002)

(3)  To find  the  acceptance criteria  related to  missing fasteners On  engine components:  CFM56  ENGINE

- For the  electrical wire harnesses: (Ref. TASK  71-50-00-210-001)

- For the  thrust-reverser  primary-latch mechanism (blocker doors deployed): (Ref. TASK 78-31-00-210-041)

- For the  exhaust  centerbody (missing  rivets): (Ref. TASK  78-11-12-210-042)

- For the  core  nozzle  (missing  rivets): (Ref. TASK  78-11-11-210-041)

- To find the acceptance criteria related to missing fasteners On  engine components:  V2500 ENGINE For the  forward engine mount: (Ref. TASK  71-21-12-200-011)

- For the  thrust-reverser blocker  doors and linkages: (Ref. TASK  78-32-00-200-014)

- For the  mixed exhaust  system: (Ref. TASK  78-10-00-200-012)

D. Maintenance Procedures and Servicing

(1)  Hydraulic  fluid filling  and level check

- To fill the  hydraulic  fluid reservoir with a hand pump: (Ref. TASK12-12-29-611-001)

- To fill the  hydraulic  fluid reservoir With hydraulic  service cart: (Ref. TASK  12-12-29-611-002)

- To do a fluid level check on reservoir indicators: (Ref. TASK  29-10-00-200-001)

- To have general  rules  and main links to  hydraulic  systems (Bleeding...): (Ref. TASK  29-00-00-910-004)

(2)  Accumulators and shock absorbers: nitrogen  check and filling

- To do a nitrogen  charge pressure  check on hydraulic  power accumulators:

(Ref. TASK  32-44-11-200-001)

(Ref. TASK  29-10-00-200-008)

- To do a nitrogen  charge pressure check on parking/emergency accumulators by reading  gage:

(Ref. TASK  29-10-00-200-008) (Ref. TASK 32-44-11-200-001)

- To charge the door damper and emergency operation  cylinders at  theemergency exit doors (If installed): (Ref. TASK  52-22-00-614-002)

(3)  Landing gear and wheels:

pressure  check,  inspection and fluid level

- To do an inspection of  the brakes with or without  wheels: AMM32-42-27  PB  601

- To do an inspection of  the  wheels and tires: AMM  32-41-00 PB  601

- To do a check of  the  NLG  shock-absorber  fluid level: (Ref. TASK  12-12-32-611-001)

- To do a check of  the  NLG  shock-absorber  charge pressure: (Ref. TASK12-14-32-614-004)

- To do a check of  the  MLG  shock-absorber  fluid level: (Ref. TASK  12-12-32-611-004)

- To do a check of  the  MLG  shock-absorber  before  flight: (Ref. TASK12-14-32-200-001)

(4)  Engine,  IDG and APU  oil level

- To do an engine oil level check and replenishing: (Ref. TASK  12-13-79-610-002) (Ref. TASK  12-13-79-610-011)

- To do an IDG oil level check and replenishing: (Ref. TASK  12-13-24-612-041) (Ref. TASK  12-13-24-612-010)

- To do an APU  oil level check and replenishing: (Ref. TASK  12-13-49-612-001)

(5)  Fuel: Refueling

- To do a pressure  refueling with automatic  control: (Ref. TASK  12-11-28-650-003)

- To do a pressure  refueling with manual control: (Ref. TASK  12-11-28-650-004)

- To do a pressure  refueling without  electrical power: (Ref. TASK  12-11-28-650-005)

- To do an overwing refueling: (Ref. TASK  12-11-28-650-006)

- To drain  the  tank water content: (Ref. TASK  12-32-28-281-001)

(6)  Oxygen

- To do the  replenishing of  the  passenger oxygen cylinder (Ifinstalled): (Ref. TASK  35-21-00-614-002)

- To do an inspection of  the crew oxygen cylinder pressure: (Ref. TASK  35-10-00-200-001)

(7)  Lights:  Tests

- To do a functional test of  the  emergency lights in  the  cabin  by LIGHT  EMER pushbutton switch: (Ref. TASK  33-51-00-710-007)

- To do a functional test of  the  emergency lights in  the  cabin  by TEST EMER LIGHT  SYS pushbutton switch: (Ref. TASK  33-51-00-710-001)

- To do a check of  all cabin  lights and signs: (Ref. TASK  33-51-00-710-009)

(8)  Potable  water and waste

- To fill the  potable-water tank system with aircraft electrical power: (Ref. TASK  12-15-38-613-001)

- To fill the  potable-water tank system without  aircraft electrical power: (Ref. TASK  12-15-38-613-002)

- To drain  the  potable  water system with electrical power: (Ref. TASK12-24-38-680-001)

- To drain the potable water system without electrical power: (Ref. TASK  12-24-38-680-002)

- To do the  servicing of  the  toilet system: (Ref. TASK  12-16-38-613-001)

- To do the  servicing of  the  liquid soap dispencer: (Ref. TASK  12-16-25-613-001)

E. Standard Practices

(1)  Airframe  and System

- To find  the  standard  procedures:  AMM  20-20-00 PB  001

- To find  the  standard  torques: AMM  20-21-00 PB  001

- To find  the installation and repair of tubings: AMM 20-23-11 PB  201

- To find  the  bonding procedures:  AMM  20-28-00 PB  201

(2)  Engine

- To find  the wiring standard procedures:  AMM  70-71-00  PB 001

- To find  the  standard  torques: (Ref. TASK  70-23-00-911-002) (Ref. TASK  70-23-00-911-013)

- To find  the  nacelle maintenance procedures: (Ref. TASK  70-60-00-910-041)

(3)  Electrical

- To find  the  electrical standard  procedures: (Ref. ESPM  20-51-00)

- To find  the  electrical  repair procedures: (Ref. ESPM  20-53-00)

- To find  the  electrical cleaning  procedures: (Ref. ESPM  20-55-00)