请问这些数字是代表什么

我爱机务 · 发表于 2011-11-9 00:00:30

前面数字明白但是后面数字是什么意思，比如后面的861——001，010——001，991——003是什么意思

air737 · 发表于 2011-11-9 01:35:37

和你一样

一塌胡涂 · 发表于 2011-11-9 08:05:35

这是那点的啊。是AMM手册上的吗

f214216709 · 发表于 2011-11-9 08:21:34

检查、维护等看手册的介绍呀

quite258 · 发表于 2011-11-9 13:19:16

AMM手册的章节号吧！

steven85 · 发表于 2011-11-9 13:28:37

章节号吧！

air737 · 发表于 2011-11-9 14:34:36

章节排序

lover_105 · 发表于 2011-11-9 16:42:56

章节号任务号

gf91215225 · 发表于 2011-11-9 17:33:05

AMM章节

special · 发表于 2011-11-9 19:14:06

看手册前面的INTRODUCTION，里面有介绍

zhangdada001 · 发表于 2011-11-9 20:48:46

新机务啊？这个。。。不知道吗手册看的太少了

jingzhiwei83 · 发表于 2011-11-9 20:54:05

也不懂啊

haohai318 · 发表于 2011-11-9 22:07:36

起落架啊资料啊

gzhy · 发表于 2011-11-9 22:14:16

代表不同的维护分类啊，看AMM介绍部分会告诉你具体页码的分类

Elavicle917 · 发表于 2011-11-9 22:25:50

章节号任务号 32 是langding gear 起落架

手谈天下事 · 发表于 2011-11-9 23:02:32

第一个系统号，第二个子系统号，第三个子子系统或称为项目号，第四个功能号，比如000代表拆卸、400代表安装，最后一个构型编号，反映不同厂家件号的产品或代表部件的某一具体组成部分。

peterpollicy · 发表于 2011-11-10 18:59:00

详细情况可以去看各手册前言部分的AMTOSS，下面是TSM前言部分的AMTOSS，有兴趣的可以看看

AMTOSS (Aircraft Maintenance Task Oriented Support System)

(1) Task/Subtask Numbering System

The fault isolation procedures can generally be considered as corrective maintenance tasks. Therefore, AMTOSS (Aircraft Maintenance Task Oriented Support System) has been applied to the TSM for the functional arrangement of the data. This also has the advantage of consistency with the AMM (Aircraft Maintenance Manual). Consequently, the fault isolation procedures are broken down into AMTOSS tasks and subtasks. However, only the Task numbers are printed in the TSM and the subtask numbers are omitted. A brief description of the structure of Task numbers follows, for further information please refer to the AMM introduction.

                     Task Elements/ TASK XX-XX-XX-XXX-XXX-XXX-XXX
                                                               1    2 3 4    5    6    7

-------------------------------------------------------------------------------

ELEMENT       FUNCTION

-------------------------------------------------------------------------------

1 to 3       ATA six digit number

4             This three digit numeric function code is used to indicate the

            particular function involved. For the TSM this is always 810.

5             This three digit numeral enables a unique identification task

            number to be allocated for all Tasks which are identically

            numbered throughout the preceding elements.

            Task idents begin at 801 and raise, in sequence, to

            999 (maximum) within the P. Block.

            Illustrations and tables are considered as tasks.

6             This three digit alphanumeric indicator consists of:

            - First digit alpha to indicate a different configuration

               (modification, service bulletin(s), etc.).

            - Second and third digit numerals to indicate alternative

               methods/techniques of trouble shooting

Example:

            -78-31-00-810-801-A 01

                              !  !

                              !  !

                              !  !

            This alpha digit-!  !

            identifies a       !

            configuration    !

            (SB etc.).       !

                                 !

                                 !

            These two numerical-!

            digits identify a

            configuration of

            method/technique.

   - Configurations due to different modification standard, Service

      Bulletin (SB) incorporation, etc.:

            78-31-00-810-801-A

                              -

                              !

                              !

            --------------------------------

            * this digit is blank when no

               configuration exists

            * when subsequent configurations

               of criteria are incorporated, this digit

               changes as follows:

               78-31-00-810-801-A  first configuration

               78-31-00-810-801-B  second configuration

               78-31-00-810-801-C  third configuration

   - Configurations due to different methods/techniques for trouble shooting

            78-31-00-810-801- 01

                              --

                              !

            -------------------------------------

            * these two digits are blank

               when only one maintenance configuration

               exists

            * when there are several configurations

               of method, these digits change as

               follows:

               78-31-00-810-801    first configuration

               78-31-00-810-801- 01  second configuration

               78-31-00-810-801- 02  third configuration

The method/technique configurations have always the same A/C effectivities.

The deletion of one configuration does not change the three digit alphanumeric

indicator of the remaining task(s).

NOTE: When a trouble shooting operation is completely different because the

   equipment design is different, (example: different vendors),

   the mention "Config." appears at the bottom of the page to

   differentiate all configurations.

7             A three digit alphanumeric indicator can be assigned

            by the airline to highlight unique airline data.

------------------------------------------------------------------------------

yaochenmomo · 发表于 2011-11-23 15:00:17

手册的章节号啊，后面是各个的款项

wanglizhige · 发表于 2011-11-27 17:05:41

这是那点的啊。是AMM手册上的吗

森之水滴 · 发表于 2012-1-3 14:13:46

非常好的回答。

cxw802844 · 发表于 2012-5-9 18:54:27

15楼专业！

pstarmj · 发表于 2012-5-23 23:10:29

ata章节号

longwei · 发表于 2012-5-26 21:27:51

15楼已经解释清楚了

d729383 · 发表于 2012-5-28 12:05:05

是章节号吧！

帐号		自动登录	找回密码
密码			立即注册

[1-19通用] 请问这些数字是代表什么

回楼主(我爱机务) 的帖子

浏览过的版块

国航

南航

中国民航大学

实名认证

在线王

吉祥航空

成都航空职业技术学院

中国民航飞行学院

海航

北京航空航天大学

东航

TAECO

西安航空职业技术学院

四川航空

广州民航职业技术学院