|
|
上海普惠飞机发动机维修有限公司由中国东方航空公司与美国联合技术公司旗下的普惠公司合资，于2007年11月6日正式成立，并于2009年9月正式开始生产。合资公司已取得中国CAAC维修执照、美国FAA维修执照。
合资公司设立在上海青浦出口加工区内，是华东地区唯一一家飞机发动机维修服务中心，主要维修CFM56-5B、CFM56-3、CFM56-7型发动机，并逐步扩展到其他型号发动机。经营范围具体着眼于发动机及其相关零部件的MRO服务的开发与提供，包括发动机的进厂、拆散、技术检查、零部件及维修的外包与采购、组装、大修后的发动机的测试和交付，以及与之相关的所有规范工程、数据管理和行政管理等。合资公司将立足于中国东方航空公司在役发动机的修理，同时积极拓展中国国内和亚太地区的第三方发动机修理市场。
公司目前拥有120名左右正式员工和50名学徒工人，其中工程师和技师都有着丰富的发动机修理经验。公司组织架构分为工程、生产、质量、物料、设备、财务、人事等部门。设施全面投产后，每年将大修300台发动机，拥有大约600-800名员工。
合资公司将成为亚太地区提供发动机MRO服务的普惠“优秀中心”， 一个从事CFM56高压压缩机叶片维修（“HPC”）的“优秀中心”。
2010年招聘已拉开序幕，上海普惠诚邀您的加入！为了您能更成功地应聘，请将您详细的中英文简历发送至Email：pwshanghai_hr@pwap.utc.com，或邮寄至：上海青浦区北青公路8228号一区8号，邮编：201707，传真：021-39230088 联系人：人力资源部
Tooling Engineer
Senior Mechanic/Mechanic- Fan Assemblly & Disassembly
Piece Part Inspector
Repair Cell Leader
Production Planner
Senior Mechanic/Mechanic_Test Cell
Senior Mechanic/Mechanic_Engine Assembly & Disassembly
Technical Instructor
Repair Engineering Manager
Apprentice Engineer (2010年航空发动机应届毕业生)
Mechanic- LPT Assemblly & Disassembly/机械员-LPT车间
Repair Mechanic_Welding/Plasma/Painting&Rubber Seal/Machining/Polishing/Heat Treatment
Certify Staff 质量放行工程师
Powerplant Engineer
Quality Audit Engineer
Customer Support Manager
NDT Inspector/Mechanic
Supervisor/Senior Mechanic/Mechanic Core Dissy/Assy Cell
Tooling Engineer
工作地点 Location：Shanghai
招聘人数 Recruit：1
Tooling Engineer
Department: Engineering
RESPONSIBILITIES:
- Primary responsibility handling all aspects of Tooling Development, Design, creation, repair, and modification.
- Work closely with Production Engineering and Repair Engineering to identify and maintain tooling requirements.
- Assist with procurement of new tooling and outsourcing of tooling modification.
- Work closely with Repair Department and develop and design repair fixtures. Oversee Repair Department manufacture of fixtures following designs.
- Follow directives of Engineering Manager to ensure production, repair, and test requirements are met.
- Ensure that all statutory and company’s regulations and standard’s relating to tooling are complied with and adhered to, and that any such work undertaken by the JV meets the standards required by the OEM, regulatory authorities, and the customer.
- Actively support the quality and productivity improvement and maintenance cost reduction initiatives.
- Ensure to work within the guidelines of and to foster company EH&S, UTC Ethics requirements, and ACE initiatives.
- Complete other tasks assigned by the supervisor.
QUALIFICATIONS:
- Bachelor Degree in engineering/mechanics.
- Minimum 2 Years experience in tooling and experience in aerospace preferred.
- Excellent verbal and written communication skills in both Chinese and English.
应聘此职位 Apply Here
Senior Mechanic/Mechanic- Fan Assemblly & Disassembly
工作地点 Location：Shanghai
RESPONSIBILITIES:
- Properly executing the duties assigned.
- Performs maintenance and alteration tasks on civil aviation articles in fan cell in accordance with the current technical data provided in the manufacturers’ Instructions for Continued Airworthiness, Services Bulletins, service letters, Airworthiness Directives, government and industry standard practices, customers’ requirements and other data acceptable to or approved by the CAAC/FAA and other aviation authorities.
- Understand the principles of engine flow and build sequence.
- Recognize and correct mistakes and turn backs using simple ACE tools.
- Know customer/manufacturer requirements and company policies and procedures.
- Operate as per relevant Technical data and standard procedure
- Apply the data approved by all aviation authorities (e.g. CAAC/FAA) that applies.
a. Service Bulletins (SB), Mandatory Inspection (MI) and Airworthiness Directives.
b. EIR (Engine Inspection Record).
c. Current Engine Manuals and tool bulletins.
- Dispense tools / equipment for repair and calibration.
- Perform cross-functional jobs within the cell
- Supervise others within the same job function
- Recognize the part number and verify against work orders
- Other duties as assigned to him/her by the Supervisor
QUALIFICIATIONS:
- Mechanical, Aeronautical or Mechantronics Engineering Diploma from a technical school or above.
- More than 3 years experience on Engine Overhaul – Fan Module & Sub-module assembly/disassembly or 4 years of Aviation Maintenance, HPC/HPT/Combustion module experiences preferred. CFM 56 engine overhaul experience is preferred.
- Linipot check/VSV rigging experiences are preferred.
- Excellent verbal and written communication skills.
- Can communicate in English.
应聘此职位 Apply Here
Piece Part Inspector
工作地点 Location：Shanghai
招聘人数 Recruit：2
RESPONSIBILITIES:
Perform piece part level inspection, know how to inspect part per ESM
Can correctly handle unserviceable part and scrap part per ESM
Basically required knowledge of measurement such as: Roundness / Run out / Flatness / Parallel
Correctly operate measurement tooling
Correctly operate 3D measure machine, understand function of different measurement probes
Perform inspection and measurement sheet report with 3D measurement machine
Know how to daily maintenance the 3D measurement facility
Correctly inspect the following modules and related piece parts:
Fan Frame and related parts
Fan and Booster and related parts
No.1 & No.2 Bearing Support and related parts
Inlet Gearbox and related parts
HPC Rotor and related parts
HPC Forward Stator Case and related parts
HPC Rear Stator Case and related parts
Combustion Case and related parts
Combustor and related Parts
HPT Nozzle and related parts
HPT Rotor and related parts
LPT Stage 1 Nozzle and related parts
LPT Stator and related parts
LPT Rotor and related parts
LPT Shaft and related parts
Turbine Frame and related parts
Accessory Gearbox (AGB) and related parts
Transfer Gearbox (TGB) and related parts
Duct, tube, bracket and related parts
QUALIFICIATIONS:
Completed High School or equivalent or Higher National Trade Certificate (Aerospace or Engine trade preferred) or Completed Aerospace Apprentice Training Program (24 months program) or Holder of various aviation authority type courses (Mechanical, Basic Gas turbine, Avionics. Completed and passed the relevant examinations conducted by Regulatory Authority.
Minimum 3 Years Engine Overhaul experience. CFM 56 engine overhaul experience is preferred.
CAAC licence on PWT or MEC is preferred.
Excellent verbal and written communication skills.
Can communicate in English.
应聘此职位 Apply Here
Repair Cell Leader
工作地点 Location：上海 Shanghai
RESPONSIBILITIES:
Participate as a team member in the EH&S SubCommittee team.
Carry out the actions plan as decided by the team.
Work with the team to monitors the results to meet the subcommittee’s planned objectives.
Participate in periodic emergency response evacuation drills.
100% follow the Q.A system to expedite and prioritize work order per customer requirement and keep repair line balance.
Ensure scheduled Std. Work events are completed as planned.
Daily report shop status to Repair Manager.
Ensure that cell has daily shutdown and equipment is thoroughly cleaned.
Encourage cell personnel to continually clean their workstation after use.
Keep TAKT Time clock updated on a monthly basis and continually highlight its significance in the cell.
Ensure that cell floor is marked as required and continually encourage cell personnel to keep aisles clear at al times.
Continually encourage the use of labeling / storage / shadowboards for tools / gages etc.
Ensure that EH&S issues are addressed in a timely manner.
Ensure that Daily Walkarounds are completed and signed off by Operator.
Ensure that scheduled TPMs / PMs / Cleans etc. are completed as required.
Ensure QCPC data is full collected.
Actively pursue mistake proof ideas to Engineer.
Provide support / resources necessary for the implementation of ideas.
Support each Setup reduction team and provide necessary resources to complete tasks.
Provide leadership for cell restructure and implementation of standard work.
Support each Std. work team and provide necessary resources to complete tasks.
Provide adequate time / support for ACE Pilot to complete his/her duties.
Encourage full participation from all cell personnel in all aspects of ACE
Support the Continuous Improvement programs and ACE activities within the company.
QUALIFICIATIONS:
College degree or above majoring in aerospace, engineering or aerospace engine.
Minimum 5 Years Engine Overhaul experience with minimum 2 years supervisory experience. CFM 56 engine overhaul experience is preferred.
CAAC licence on PWT or MEC is preferred.
Ability to speak, write and understand English.
Acceptable communication and interpersonal skill and ability to communicate with all levels.
Ability to use applicable modules in Visibility or SAP system.
Basic problem solving skill.
Ability to work cohesively in a team.
应聘此职位 Apply Here
Production Planner
工作地点 Location：Shanghai
招聘人数 Recruit：1
Production Planner
Responsibilities:
- Scheduling and controlling production to ensure set targets are met.
- Plan and control production, schedule and resources to meet business commitment;
- Make sure that the Logistic and Production are working according the program plan (TAT);
- Coordinate, balance and solve risks and conflicts in production process;
- Interface to Business Team, Technology Team and Manufacture Team. Works closely with teams to drive all departments reach the target;
- Conducts reviews and generate reports to management regularly on manufacturing activities, performance and results, corrective actions to delivery, material shortage and other manufacturing issues;
- Any additional tasks related to the function as requested by the immediate superior.
- Any additional tasks related to the function as requested by the immediate superior.
Qualifications:
- College degree or above.
- At least 3 years experience in similar function in aviation industry.
- Training Received: Basic engine knowledge.
- Personality: Team working spirit, strong communication and interpersonal skills, hard working; Good ability to organize and leading.
- English and Computer Skills: Very good knowledge of English reading and writing and computer skills.
应聘此职位 Apply Here
Senior Mechanic/Mechanic_Test Cell
工作地点 Location：Shanghai
招聘人数 Recruit：4
Mechanic_Test Cell
RESPONSIBILITIES:
- Properly executing the duties assigned.
- Performs maintenance and alteration tasks on civil aviation articles, in the Test Cell in accordance with the current technical data provided in the manufacturers’ Instructions for Continued Airworthiness, Services Bulletins, service letters, Airworthiness Directives, government and industry standard practices, customers’ requirements and other data acceptable to or approved by the CAAC/FAA and other aviation authorities.
- Apply knowledge in a practical manner using detailed procedures
- Recognize repairable or as-removed units and match to their respective repair orders.
- Understand the basic principles in how a unit operates and know its most common causes for failure.
- Recognize and correct inaccuracies and simple issues.
- Know customer/manufacturer requirements and company policies and procedures.
- Ensure completion of work as per customer/ manufacturer requirements and company policies and procedures by taking necessary measurements and checking duly completed paperwork.
- Apply the data approved by all aviation authorities (e.g. CAAC/FAA) that applies to this unit:
a. CMM document number and REV level
b. SBs
c. ADs regulations that apply to a repair order
d. EIR (Engine Inspection Record)
e. Engine Manuals
- Know how to determine the serviceability of parts repaired.
- Able to perform cross-functional jobs within the cell and other duties assigned by the supervisor.
QUALIFICIATIONS:
- Mechanical, Aeronautical or Mechantronics Engineering Diploma from a technical school or above. More than 2 years experience on Engine Testing-Electrical.
- Experience of line engine test preferred.
- Understand cell responsibility and process in details and be able to coach team members.
- Good verbal and written communication skills.
- Can communicate in English.
应聘此职位 Apply Here
Senior Mechanic/Mechanic_Engine Assembly & Disassembly
工作地点 Location：Shanghai
招聘人数 Recruit：3
Senior Mechanic/Mechanic-Engine Assembly and Disassembly
Department: Engine Dissy/Assy Cell
RESPONSIBILITIES:
- Planning, organizing and allocating work to the mechanics and other staff under his/her charge
- Implement schedule and checks to ensure that all tools, technical manuals and spares used are up to date and, in good working condition and in compliance with airworthiness requirements
- check and ensure that formalized process documents used are duly revised and submission meet target date
- Co-ordinate with other sections on work related matters
- Supervising staff assigned to him with regards to discipline and appearance during engine disassembly and assembly process
- Ensuring good housekeeping practices and safety procedures are observed
- Monitoring work carried out to ensure that all work undertaken, staff capability, tools/equipment, and work procedures are in compliance with airworthiness and company’s requirements
- Inspect and approve work carried out in compliance with airworthiness and company’s requirements
- Lead and participate in the implementation of ACE operation system and continuous improvement projects
- Such duties as assigned to him/her by the Supervisor
QUALIFICIATIONS:
- College degree or completed High School or equivalent or Higher National Trade Certificate (Aerospace or Engine trade preferred) or Completed Aerospace Apprentice Training Program (24 months program) or Holder of various aviation authority type courses (Mechanical, Basic Gas turbine, Avionics. Completed and passed the relevant examinations conducted by Regulatory Authority.
- More than 2 years experience on Engine Disassembly & Assembly or 4 years of Aviation Maintenance, linipot check/top case repair experiences preferred. Be able to perform Borescope Blending task CFM 56 engine overhaul experience is preferred.
- CAAC licence on PWT or MEC is preferred.
- Excellent verbal and written communication skills.
- Can communicate in English.
应聘此职位 Apply Here
Technical Instructor
工作地点 Location：北京
招聘人数 Recruit：1
Huapu Aviation Engine Training Center Co., Ltd.
(China Customer Training Center- CCTC)
Huapu Aviation Engine Training Center (CCTC) , a joint venture company between China Aviation Supplies Holding Company and Pratt & Whitney, was founded in Beijing in 2002. The main business of the Company is to provide aero-engine maintenance, repair training and management training on Pratt & Whitney engine and other OEM engines. The Center has obtained a world-class reputation in class training, student service and facility capability.
Job Title: Aero-Engine Technical Instructor
Responsibilities:
l To deliver training courses on P&W engines, using:
¡ appropriate training techniques;
¡ various training aids;
¡ engine shop & classrooms
l To interpret for training courses & conferences.
l To translate technical material.
l To maintain & update technical publication.
l To assist to enhance training aids (ex. Engine Shop Setup)
l To participate in projects concerned training business
Personnel Profile (including experience, educational qualifications, and languages):
Minimum 4 years’ experience on engine line maintenance and troubleshooting or performance.
Experience in training delivery is preferable.
Bachelor of engineering degree or above.
Bilingual English and Mandarin.
Disciplined but able to take the necessary initiatives when needed.
Highly self-motivated & willing to learn in developing training capability.
Strong sense of responsibility.
Strong communication and presentation skills.
Location: in Beijing (Tian Zhu Area)
We offer competitive salary and benefit.
Interested candidates please send detailed resumes in both English and Chinese with expected salary to: vivian.wei@pwap.utc.com
应聘此职位 Apply Here
Repair Engineering Manager
工作地点 Location：上海青浦区
招聘人数 Recruit：1
Repair Engineering Manager
Department: Engineering
Report to: Engineering Manager
Location: Shanghai, China
RESPONSIBILITIES:
- Ensuring that all statutory and Company"s regulations and standards relating to the
i). Maintenance, preventive maintenance, alteration and inspection of engines and components or
ii). Facilities and equipment maintenance and preventive maintenance are complied with and adhered to, and that any such work undertaken by the Company meet the standards required by CAAC and other airworthiness authorities.
- Develop engineering team to rapidly respond to current hardware issues.
- Identify and eliminate repair part rework/recycle/turnbacks during all repair processes. Work to achieve less than 5% in first year.
- Work to establish a proactive engineering culture.
- Work to incorporate maximum manual levels of manual repairs.
- Work with P&W Global Support Engineering to bring on-line, DER repairs equivalent to CFMI licensed repairs.
- Work to build the HPC Blade Center of Excellence.
- Identifying volume repairs, and adjusting equipment capacity as required.
- Implementing Department"s policies and procedures in relation to the repair, rework or alteration of all engine parts sourced to the department for such work.
- The planning and scheduling of work scope for engine parts requiring repair, rework or alteration to meet target dates.
- The control of the formalized repair process documents for the department.
- Implement part repairs to fulfill Joint venture Agreement requirement
- Identify, prioritize and develop part repairs and repair processes to support engine delivery requirement and reduce engine overhaul cost.
- Work and liaise with PW Engineering to introduce and implement part repairs
- Other duties are assigned by General Manager.
QUALIFICATIONS:
- Bachelor Degree in Mechanical/Production/Quality Assurance/Aeronautical Engineering;
- At least 5 years’ experience in aircraft engine workshop practices as well as maintenance and repair of gas turbine engine. CFM 56 experiences is preferred.
- Strong experience in engine part repairs development and operation, preferably CFM56 engine parts
- Acceptable communication and interpersonal skill and ability to communicate with all levels.
- Good negotiation skill.
- Strong analytical and effective problem-solving skill.
- Supervisory skills to guide and coach staff members.
- Ability to use applicable modules in SAP system.
- Good understanding of the relevant air worthiness and regulatory agencies requirement.
- Good knowledge of project management methodologies.
- Good understanding of special processes like thermal spray, welding techniques, NDT processes and materials.
- Meticulous with an eye for details and adopts a hands-on approach.
- Familiar with ACE implementation
- Ability to understand and speak mandarin will be added advantage
应聘此职位 Apply Here
Apprentice Engineer (2010年航空发动机应届毕业生)
工作地点 Location：Shanghai
招聘人数 Recruit：1
Remark: This position requires to be based at China Eastern Airlines for one year.
RESPONSIBILITIES:
-Ensure that all statutory and Company’s regulations and standards relating to the maintenance, alteration and inspection of engines and components are complied with and adhered to, and that any such work undertaken by the JV meet the standards required by the OEM, Regulatory and Customer.
-Implement policies and procedures in relation to the maintenance and preventive maintenance of all products through the facilities.
-Ensure mandatory modification, programs and alert service bulletins are incorporated or complied with as required by the customer and the applicable regulatory requirements.
-Responsible for the overall process of disassembly/assembly and repairs. Provide technical work instructions to the business unit, including assembly/disassembly and repair.
-Support unserviceable material review clinics. Develop new repairs and inspection limits to make hardware serviceable. Generate EAs/LEAs as necessary to support this activity.
-Coordinate with OEM, East Hartford Engineering and Technical Support to insure that Engine Center is utilizing the most current technical information.
-Assist PPE’s in engine module reviews during shop visit, looking for new or typical distress modes. Provide technical input for shop visit reports to the customer.
-Provide support and develop process improvement through innovative setup reduction, work simplification, tools/equipment design/modifications.
-Actively support the quality and productivity improvement and maintenance cost reduction initiatives. Support Cell Leader to meet business objectives.
-To prepare and maintain general instructions and work instructions within the processes of the repair areas/cells based on engine and component manufacturer’s documentation.
-To find solutions to technical problems in connection with his/her responsibility field and to obtain approval from the authorities for any deviations from the manufacturer’s documentation.
-Support of production and repair tooling.
-Support Purchasing and Quality to identify and regulate repair vendors and suppliers.
-To ensure compliance with Environmental, Health, and Safety initiates and to foster company ACE initiatives.
- Other duties assigned by the manager.
QUALIFICATIONS:
- Minimum: BS Degree in Engineering;
- Excellent verbal and written communication skills.
- Familiarity with engine hardware assembly and repairs is preferred.
- Exposure to Customer Support and/or Aftermarket Operations is preferred.
应聘此职位 Apply Here
Mechanic- LPT Assemblly & Disassembly/机械员-LPT车间
工作地点 Location：Shanghai
RESPONSIBILITIES:
- Properly executing the duties assigned.
- Performs maintenance and alteration tasks on civil aviation articles in LPT cell in accordance with the current technical data provided in the manufacturers’ Instructions for Continued Airworthiness, Services Bulletins, service letters, Airworthiness Directives, government and industry standard practices, customers’ requirements and other data acceptable to or approved by the CAAC/FAA and other aviation authorities.
- Apply knowledge in a practical manner using detailed procedures.
- Recognize repairable or as-removed units and match to their respective repair orders.
- Understand the basic principles in how a unit operates and know its most common causes for failure.
- Recognize and correct inaccuracies and simple issues.
- Know customer/manufacturer requirements and company policies and procedures.
- Ensure completion of work as per customer/ manufacturer requirements and company policies and procedures by taking necessary measurements and checking duly completed paperwork.
- Familiar with all tools and equipment, including inspection aids, used within their assigned area of responsibility.
- Familiar with inspection of parts per technical data.
- Apply the data approved by all aviation authorities (e.g. CAAC/FAA) that applies to this unit:
a. CMM document number and REV level
b. SBs
c. ADs regulations that apply to a repair order
d. EIR (Engine Inspection Record)
e. Engine Manuals
- Know how to determine the serviceability of parts repaired.
- Able to perform cross-functional jobs within the cell.
- Other duties as assigned to him/her by the Supervisor.
QUALIFICIATIONS:
- Mechanical, Aeronautical or Mechantronics Engineering Diploma from a technical school or above.
-More than 2 years experience on CFM56 Engine Overhaul – LPT Module & Sub-module assembly/disassembly.
- Excellent verbal and written communication skills.
- Can communicate in English.
应聘此职位 Apply Here
Repair Mechanic_Welding/Plasma/Painting&Rubber Seal/Machining/Polishing/Heat Treatment
工作地点 Location：Shanghai
RESPONSIBILITIES:
- Participate as a team member in the EH&S Sub-Committee team.
- Carry out the actions plan as decided by the team.
- Work with the team to monitors the results to meet the sub-committee’s planned objectives.
- Participate in periodic emergency response evacuation drills.
- Prepare the part for welding by performing routing, benching and polishing.
- Perform the repair and refurbishment of CFM56.
- Carry out special processes such as plasma spray / heat treatment / special process.
- Perform painting and rubber seal of parts where needed.
- Perform machining of parts where needed.
- Ensure parts are repaired according to the prescribed standards and procedures.
- Support the Continuous Improvement programs and ACE activities within the company.
QUALIFICIATIONS:
- Completed High School or Technical Vocational School or College with specialty in welding/plasma/polishing/machining.
- Minimum 3 Years Aero Engine Overhaul experience. Welding experience from ship plants is preferred.
- Licensed welder:
1. Welder Qualification according with GB/T15169 or equal standard
Certification from Home and Abroad should be mandatory.
2. Welder Go On Duty Certificate by State Labour Department is preferred.
- GTAW(TIG) experience is the basic requirement.
- OAW and Others welding experience is preferred.
- Can read technical documents in English and understand English.
- Basic problem solving skill.
- Ability to work cohesively in a team.
应聘此职位 Apply Here
Certify Staff 质量放行工程师
工作地点 Location：shanghai
Certify Staff质量放行工程师
Report to : QA Manager
Department : Quality Assurance
RESPONSIBILITIES:
- Properly executing the duties assigned.
- Ensure that all contractual requirements on airworthiness matters are complied with.
- Ensure that all statutory and Company’s regulations and standards relating to the maintenance, alteration and inspection of engines and components are complied with and adhered to, and that any such work undertaken by the SEC meet the standards required by the SEC meet the standards required by the OEM, Regulatory and Customer.
- Limit work carried out on parts, components or accessories only to those in the Capability list and SEC’s operation specification.
- Implement policies and procedures in relation to the various maintenance requirements of all engine or modules through the facility.
- Ensure all completed work carried out by Shanghai Engine Center is airworthy.
- Ensure all relevant documentations have been completed in accordance with Shanghai Engine Center procedures.
- Ensure all aspects of the work have been completed in accordance with approved technical data, Shanghai Engine Center procedures and Practices.
- Ensure all defects are rectified or have been deferred in accordance with Shanghai Engine Center procedures.
- Ensure all work have been carried out and signed for by the correct persons accepted by Shanghai Engine Center.
- Auditing of completed engine or module work packages.
- Participate investigation of all non-conformances, customer escapes and quality related complaints. Recommend, follow-up and assurance of corrective and preventive actions.
- Support Production and Engineering with clear interpretation and advice on regulatory matters.
- Actively participate and contribute to quality, customer satisfaction, cost and productivity improvement initiatives.
- Perform audit on all relevant operation departments per Shanghai Engine Center procedure.
- Participate Engine Induction Workscope setup and ensure the work scope comply with the requirements of customer and SEC procedures and documentations:
- Review the initial work scope provided by customer and ensure any queries regarding of detailed engine/module work level, release certifications, special requirements such like engine performance, specific SB incorporated, etc should be cleared prior to start.
- Participate the meeting of setup first SEC work scope guidance, ensure all customer requirements and SEC procedures were incorporated properly. Also the subject scope should be follow-up by operation staff properly.
- Supervise and verify all operational standard and approved data are latest and must be followed by all operation staff.
- Supervise and verify that all production is performed within the capability list and SEC’s operation specification.
- Supervise and verify that all work were carried out and signed by approved staff per SEC procedure.
- Supervise and verify that all Engine and engine components defects were rectified in accordance with approved data and SEC procedure.
- Auditing of completed engine or module work package and verify the correctness and integrality.
- Perform internal audit on all relevant operation departments per SEC procedure and provide the complete audit report, verify any findings should be rectified within the specified time limit.
- Participate investigation of all non-conformances, customer escapes and quality related complaints. Complete report (including of analysis, corrective and preventive actions, etc) should be provided.
- Issue the aviation certification on the qualified engine for return to service.
QUALIFICATIONS:
- Accociates/Bachelor/Graduate Degree.
- Major in aero-engine maintenance, mechanical, aeronautical, engineering.
- Have been working in Civil Aviation Industry for five years at least.
- Have been working in Aero-Jet Engine maintenance, repair and overhaul for two years at least.
- Have been working in Aero-Jet Engine production quality control / quality assurance for one year at least.
- Minimum six months OJT on relevant engine types. At least one week for LPC cell, one week for LPT cell, one week for test cell, two weeks for core cell, one week for repair cell.
- Familiar with CCAR145 requirements and other civil aviation regulations’ requirements (e.g. FAR145).
- Familiar and understand of the SEC MMM and Operation Procedure.
- Understand and use of all approved data (including of OEM data and SEC internal data).
- Understand of the aviation Human Factors concept and field.
- Understand of relevant National and Industrial Standards requirements.
- With handle of relevant audit techniques and skills.
- With handle of relevant investigation techniques and skills.
- Understand and use of SAP system.
- Understand of Jet-engine (engine/module/component).
- Understand of customer requirements.
- Civil Aircraft Component Maintenance Personnel License-PWT.
应聘此职位 Apply Here
Powerplant Engineer
工作地点 Location：shanghai
Staff Powerplant Engineer/Powerplant Engineer
Department: Engineering
Report to: Engineering Manager
Basic Function: Provide overall technical support and direction for the teardown, inspection, repair, modification, assembly and test of engines undergoing repair or refurbishment. Has technical responsibility for the overall engine during a shop visit.
RESPONSIBILITIES:
- Ensure that all statutory and Company’s regulations and standards relating to the maintenance, alteration and inspection of engines and components are complied with and adhered to, and that any such work undertaken by the JV meet the standards required by the OEM, Regulatory and Customer.
- Implement policies and procedures in relation to the maintenance and preventive maintenance of all products through the facilities.
- Ensure mandatory modification, programs and alert service bulletins are incorporated or complied with as required by the customer and the applicable regulatory requirements.
- Overall technical direction to the business unit, including assembly/disassembly direction, test program definition and troubleshooting, analysis of engine test data, disposition of deviations and maintenance of shop visit records.
- Provide directions on engine shop visit workscope definition, participate in or chair Technical Support meetings defining required maintenance actions. Coordinate available engine data and modification information to provide timely workscope definition and communication to the business unit.
- Lead troubleshooting of engine defects, incidents and performance related issues. Investigate and recommend corrective actions.
- Coordinate with OEM, East Hartford Engineering and Technical Support to insure that Engine Center is utilizing the most current technical information. Ensuring mandatory modifications programs and alert service bulletins are incorporated or compiled with, as required by the customer and the applicable regulatory requirements.
- Assist PWES program management with customer inquiries and problems. Respond to customer questions and participate in the creation and review of customer build and modification standards. Provide technical input for the issuance of shop visit reports to the customer.
- Develop engine overhaul work scope and standard work to continuously improve engine performance and reduce overhaul cost.
- Work closely with and provide technical support to Operations and various departments.
- Actively support the quality and productivity improvement and maintenance cost reduction initiatives. Support Cell Leader to meet business objectives
QUALIFICATIONS:
- Bachelor Degree in Engineering.
- Minimum 5 Years experience on aerospace engine hardware and / or test experience, and minimum 2 years’ CFM experience. Familiar with aerospace engine hardware, assembly and testing.
- CAAC license on PWT or MEC and experience with engine performance and test data analysis of CFM56 engine are preferred. Engine releasing experience is preferred.
- Exposure to Customer Support and/or Aftermarket Operations.
- Excellent verbal and written communication skills in both Chinese and English.
应聘此职位 Apply Here
Quality Audit Engineer
工作地点 Location：Shanghai
招聘人数 Recruit：1
Quality Audit Engineer
Report to : QA Manager
Department : Quality Assurance
RESPONSIBILITIES:
- Properly executing the duties assigned.
- Ensure that all contractual requirements on airworthiness matters are complied with.
- Ensure that all statutory and Company’s regulations and standards relating to the maintenance, alteration and inspection of engines and components are complied with and adhered to, and that any such work undertaken by the SPW meet the standards required by the SPW meet the standards required by the OEM, Regulatory and Customer.
- Limit work carried out on parts, components or accessories only to those in the Capability list and SPW’s operation specification.
- Implement policies and procedures in relation to the various maintenance requirements of all engine or modules through the facility.
- Ensure all completed work carried out by SPW is airworthy.
- Ensure all aspects of the work have been completed in accordance with approved technical data, Shanghai Engine Center procedures and Practices.
- Ensure all defects are rectified or have deferred in accordance with SPW procedures.
- Ensure all work have been carried out and signed for by the correct persons accepted by SPW.
- Auditing of completed engine or module work packages.
- Participate investigation of all non-conformances, customer escapes and quality related complaints. Recommend, follow-up and assurance of corrective and preventive actions.
- Support Production and Engineering with clear interpretation and advice on regulatory matters.
- Actively participate and contribute to quality, customer satisfaction, cost and productivity improvement initiatives.
- Perform audit on all relevant operation departments per SPW procedure.
- Supervise and verify that all production is performed within the capability list and SPW’s operation specification.
- Supervise and verify that all work were carried out and signed by approved staff per SPW procedure.
- Perform internal audit on all relevant operation departments per SPW procedure and provide the complete audit report, verify any findings should be rectified within the specified time limit.
- Participate investigation of all non-conformances, customer escapes and quality related complaints. Complete report (including of analysis, corrective and preventive actions, etc) should be provided.
QUALIFICATIONS:
- Accociates/Bachelor/Graduate Degree.
- Major in aero-engine maintenance, mechanical, aeronautical, engineering.
- Have been working in Civil Aviation Industry at least 3 years.
- With relevant quality auditing experience.
- Minimum six months OJT on relevant duties.
- Familiar with CCAR145 requirements and other civil aviation regulations’ requirements (e.g. FAR145).
- Familiar and understand of the SPW MMM and Operation Procedure.
- Understand of all approved data (including of OEM data and SPW internal data).
- Understand of the aviation Human Factors concept and field.
- Understand of relevant National and Industrial Standards requirements.
- With handle of relevant audit techniques and skills.
- With handle of relevant investigation techniques and skills.
- Understand of Jet-engine (engine/module/component).
- Understand of customer requirements.
- Relevant license requirements (Civil Aircraft Component Maintenance Personnel License-PWT).
应聘此职位 Apply Here
Customer Support Manager
工作地点 Location：Shanghai
招聘人数 Recruit：1
RESPONSIBILITIES:
- Operate the Customer Support Department(CSD) in an efficient and cost-effective manner;
- Ensure that all statutory and Company’s regulations and standards relating to the maintenance,
preventive maintenance, alteration and inspection of engines and components are complied
with and adhered to, and that any such work undertaken by the Company is carried out to
approved standards;
- Comply with EH&S and Code of Ethics policies and applicable regulatory requirements;
- Build successful relationships with existing customers, and develop winning proposals to
capture new customers.
- Develop and execute CS policy to support achieving sales and EBIT targets for the Company.
- Limit work carried out on parts, components or accessories only to those in the Capability List
and repair station’s operation specifications;
- Assist General Manager in ensuring that work performed on customer’s products and components meets their requirements in terms of quality, cost and turn-around-time.
- Ensure customer satisfaction is achieved through effective communication and developing effective team relationships with departments within company so that the customer’s requirements are understood and satisfied;
- Provide a direct link to customer for technical and commercial requirements;
- Such other duties as may be assigned by the General Manager.
- Provide customer support on establishment of work scopes of engines to meet customers’
requirement;
- Communicate effectively with the customer on engine work scope, engine progress, warranty
matters, invoices and bill payments and their implementations to the contractual requirements
of the customer and the company;
- Effectively and efficiently resolve all customer complains to the satisfaction of the customers;
- Promote the company’s engineering capabilities, maintain business contacts with potential
customers;
- Initiate the operational system in time to accept all new and additional jobs or tasks;
- Monitor all Work-In-Progress (WIP) jobs and report prolonged ones for attention and completion;
- Attend and assist Technical Services in engine input meeting with representatives from Quality
Assurance, Material and other production and support services area;
- Assist in evaluation of customer work packages and preparation of proposal;
- Liaise between the customers and production staff during the course of customer work so as to
ensure customer’s requirements are understood and can be implemented;
- Disseminate JAN (Job Account Number) information to the operational staff so that whatever
costs incurred is properly accounted;
- Implement the necessary corrective actions resulting from the quality compliance monitoring
and audit programs.
- Participate as an integral member of the company management team, provide in-puts on
company planning, growth and investment strategies;
QUALIFICATIONS:
- Familiar with CFM56 engine overhaul process and overhaul market.
- Good data analysis skill and acute marketing analysis ability, customer-oriented. .
- Good social communication, coordination, organization and presentation skill.
- Able to analyze and solve problem.
- Good time management capability.
- Ability to work cohesively in a team.
- Good English capability in listening, speaking, reading and writing.
- Good computer skill.
- Minimum 10 years experience in aircraft engine manufacturing or overhaul industry, strong technical background, with at least three years experience in customer support role.
- Familiar with process of engine overhaul and components repair
- Familiar with CAAC regulations
应聘此职位 Apply Here
NDT Inspector/Mechanic
Department: Operation
Responsibilities:
Have the skills and knowledge of setup and standardize equipment,conduct test,interpret and evaluate for acceptance and rejection for the part
Willing perform cleaning for the engine parts
Control the quality of cleaning and NDT inspection process
Prepare the relative document in accordance with the written practice
Provide necessary guidance and supervision to trainee and level 1 personal
Support supervisor and cell leader to reach the goal of department and company
Qualifications:
Education background: technical school or above, major in metal material or NDT
At least 2 years experience as licensed level 2 NDT inspector, CFM56 experience is preferred
Training received: NDT level 2 license for PT/ET/MT methods certified by PCN/ASNT/CAAC or other industry authority
Good communication skill in both English and Chinese
应聘此职位 Apply Here
Supervisor/Senior Mechanic/Mechanic Core Dissy/Assy Cell
RESPONSIBILITIES:
Planning, organizing and allocating work to the mechanics and other staff under his/her charge
Implement schedule and checks to ensure that all tools, technical manuals and spares used are up to date and, in good working condition and in compliance with airworthiness requirements
check and ensure that formalized process documents used are duly revised and submission meet target date
Coordinate with other sections on work related matters
Supervising and controlling staff assigned to him with regards to discipline, conduct and appearance
Ensuring good housekeeping practices and safety procedures are observed
Monitoring work carried out to ensure that all work undertaken, staff capability, tools/equipment, and work procedures are in compliance with airworthiness and companys requirements
Inspect and approve work carried out in compliance with airworthiness and companys requirements
Lead and participate in the implementation of ACE operation system and continuous improvement projects
Do core module and submodule assembly/disassembly
Other duties as assigned to him/her by the Supervisor
QUALIFICIATIONS:
College or completed High School or equivalent or Higher National Trade Certificate (Aerospace or Engine trade preferred) or Completed Aerospace Apprentice Training Program (24 months program) or Holder of various aviation authority type courses (Mechanical, Basic Gas turbine, Avionics. Completed and passed the relevant examinations conducted by Regulatory Authority.
More than 3 years experience on Engine Overhaul Core Module & Submodule assembly/disassembly or 4 years of Aviation Maintenance, HPC/HPT/Combustion module experiences preferred. CFM 56 engine overhaul experience is preferred.
Linipot check/VSV rigging experiences are preferred.
CAAC licence on PWT or MEC is preferred.
Excellent verbal and written communication skills.
Can communicate in English. |
|
特立独行的家伙们
M5知识点，熟记后M5必过
求購ADTS 相關系列軟管Fitting. 如圖.
A320驾驶舱面板指南【03】
发表于 2010-5-20 00:13:44
