求767一些测试自检的章节号

vonleolpsy · 发表于 2008-12-29 14:39:59

1.设备冷却系统低流量警告测试
2.外流活门操作试验
3.空调组件自检

谢谢~

孤独求败 · 发表于 2009-2-7 14:57:03

使用中央维护计算机进入地面故障测试页面进入ATA21就可以找到你需要的测试选项。

上鹤の飞 · 发表于 2011-2-7 09:57:54

朋友这是767没有这套系统的

lzf08980898 · 发表于 2011-2-7 15:14:33

飞机维护手册上应该有啊。
TASK 21-58-17-422-008
Install Equipment Cooling Low Flow Detector .
.
.
.
(7) Put the EQUIP COOLING mode selector on the pilot's overhead P5 panel to AUTO. S 862-014
(8) Push and hold the EQUIP COOL test switch on the P61 panel to EQUIP COOL position. Make sure the EQUIP COOLING OVHT light on the P5 panel comes on. S 862-018
(9) Release EQUIP COOL test switch on the P61 panel.

lzf08980898 · 发表于 2011-2-7 15:20:21

外流活门操作测试
TASK 21-31-03-402-006
Install the Cabin Pressure Outflow Valve
.
.
.
H. Do the outflow valve installation test. S 862-014
(1) Remove the DO-NOT-CLOSE tags and close these circuit breakers on the P11 panel: (a) 11B14, CABIN ALTITUDE CONTROL MANUAL (b) 11P15, CABIN ALTITUDE CONTROL AUTO 1 (c) 11P23, CABIN ALTITUDE CONTROL AUTO 2 S 862-015
(2) Supply electrical power (AMM 24-22-00/201). S 862-016
(3) Put the MODE SELECT selector, on the overhead panel, P5, to the MAN position. S 862-018
(4) Turn the MANUAL selector to the DESCEND position. S 212-077
(5) Make sure the VALVE position indicator needle moves to the CL position within 25 seconds.
NOTE: Different part number combinations of the cabin pressure controller and the outflow valve installed on the aircraft can cause the VALVE position indicator needle to point differently at the "CL/OP" positions.

NOTE: Refer to AMM 21-31-00/501 for the normal position of the the VALVE position indicator needle at the "CL/OP" positions when different part number combinations of the cabin pressure controller and outflow valve are installed on the aircraft.

S 862-020
(6) Put the MODE SELECT selector, on the P5 panel to the AUTO 1 position. S 212-078
(7) Make sure the VALVE position indicator needle moves to the OP position within 13 seconds.
NOTE: Different part number combinations of the cabin pressure controller and the outflow valve installed on the aircraft can cause the VALVE position indicator needle to point differently at the "CL/OP" positions.

NOTE: Refer to AMM 21-31-00/501 for the normal position of the VALVE position indicator needle at the "CL/OP" positions when different part number combinations of the cabin pressure controller and outflow valve are installed on the aircraft.

S 862-023
(8) Put the MODE SELECT selector, on the P5 panel to the MAN position. S 862-025
(9) Turn the MANUAL selector to the DESCEND position. S 212-079
(10) Make sure the VALVE position indicator needle moves to the CL position within 25 seconds.
NOTE: Different part number combinations of the cabin pressure controller and the outflow valve installed on the aircraft can cause the VALVE position indicator needle to point differently at the "CL/OP" positions.

NOTE: Refer to AMM 21-31-00/501 for the normal position of the position of the VALVE position indicator needle at the "CL/OP" positions when different part number combinations of the cabin pressure controller and outflow valve are installed on the aircraft.

S 862-027
(11) Put the MODE SELECT selector, on the P5 panel, to the AUTO 2 position. S 212-080
(12) Make sure the VALVE position indicator needle moves to the OP position within 13 seconds.
NOTE: Different part number combinations of the cabin pressure controller and the outflow valve installed on the aircraft can cause the VALVE position indicator needle to point differently at the "CL/OP" positions.

NOTE: Refer to AMM 21-31-00/501 for the normal position of the VALVE position indicator needle at the "CL/OP" positions when different part number combinations of the cabin pressure controller and outflow valve are installed on the aircraft.

I. Put the airplane back to its usual condition.

lzf08980898 · 发表于 2011-2-7 15:29:51

空调组件的自检其实就是温度控制的自检

TASK 21-61-00-715-001
Operational Test - Zone Temperature Control System Fig. 501

TASK 21-61-00-735-010
System Test - Primary (Zone) Temperature Control System Fig. 501, Fig. 502, Fig. 503

内容太多，不好COPY出来，你按照我提供的章节号去打开MM手册吧。

帐号		自动登录	找回密码
密码			立即注册

[通用经验] 求767一些测试自检的章节号

上海航空

上海理工大

上海工程技术大学

实名认证