|
|
楼主 |
发表于 2008-10-13 10:46:34
|
显示全部楼层
来自： 中国陕西西安
厦门太古发动机服务有限公司招聘
Taikoo Engine Service (Xiamen) Co. Ltd (TEXL) is a Xiamen based joint venture, located in Xiamen GaoQi aviation industry zone and established in 2008 by Hong Kong Aircraft Engineering Co. Ltd, Cathay Pacific Airlines, Taikoo (Xiamen) Aircraft Engineering Co. Ltd. Xiamen Aviation Industry Company to provide aero-engine (GE90) repair and overhaul services in the Asia-Pacific region. The first engine will be inducted in the first half of year 2010 and the overhaul capacity is expected to 150 engines per year upon fully operation.
公司简介：
厦门太古发动机服务有限公司（TEXL）位于厦门高崎航空工业园，2008年由香港飞机工程有限公司、香港国泰航空公司、厦门太古飞机工程有限公司、厦门航空工业有限公司合资建立的面向亚太地区提供GE90航空发动机大修服务的合资公司。预计2010年上半年第一台发动机入厂维修，投产后的年维修能力将达150台。
Wanted 招聘职位
A） Trainee Aero Engine Overhaul Tradesmen
航空发动机大修技工学徒
B） Aero Engine Overhaul Tradesmen
航空发动机大修技工
C） Aero Engine Component Repair Tradesmen
航空发动机零部件修理技工
D） Aero Engine Test Cell Technician
航空发动机测试技术员
E） NDT Technician
无损探伤技术员
F） Aero Engine Overhaul Technician / supervisor / Team Leader
航空发动机大修技术员/班长/组长
The General Requirements for the above position
以上职位均要求：
？ Higher Diploma or above certificate in Mechanical Engineering or related field，aircraft maintenance or related subject would be preferred
机电工程或相关专业大专或以上学历,机务维修及相关专业更佳
？ Good command of read，written and spoken English on engine overhaul or technical subjects
良好的英语读说写能力，能够运用在发动机大修及相关技术方面
？ Positive and proactive individuals able and willing to work in a dynamic environment
具备积极及主动的个人能力并愿意在变化的环境中工作
？ Any experience with GE90 engine overhaul / component repair would be preferred.
任何具有GE90发动机大修/及零部件维修经验的优先考虑
A) Trainee Aero Engine Overhaul Tradesmen
航空发动机大修技工学徒
Responsibility
？ To be trained in the basic hand skills and technology associated and necessary to perform disassembly/assembly of aircraft gas turbine engines and modules
接受基本的有关飞机燃气涡轮发动机及其组件的拆卸和组装方面的技工技能和工艺培训
？ To carryout the disassembly and assembly of engines and modules under the supervision and guidance of supervisors / technicians / engineers
在领班/技术员/工程师的监督和指导下进行发动机及其组件的拆卸和组装工作
B) Aero Engine Overhaul Tradesmen
航空发动机大修技工
Special Requirement:
● Experienced in disassembly/assembly of gas turbine engines or modules. Familiar with engine manuals, technical publications, documentation and control procedures, Able to read and interpret technical drawings
具备燃气涡轮发动机及其组件的拆卸及组装工作的经验，熟悉发动机维修手册、技术出版物、文件及控制程序，能够阅读及解释技术图纸
Responsibility
？ To work either independently or as part of a team to carryout the disassembly, repair and assembly of large fan gas turbine engines and modules
独立或与班组一起进行大型风扇燃气涡轮发动机及组件的拆卸，修理和组装的工作
？ To perform engine component visual and dimensional inspection
执行发动机零部件的目视及尺寸检查
？ To complete working cards and certify work accomplished
完成工作单上的工作及工作完成后的确认签署
？ To take part in and assist in process improvement activities
参与及协助进行流程改善工作
C) Aero Engine Component Repair Tradesmen
航空发动机零部件修理技工
Special Requirement:
● Experienced / tradesman in milling, grinding turning, programming of CNC equipment, thermal spray or welding
具备使用打磨机，磨具及CNC设备的编程，热喷涂或焊接的经验
Responsibity
？ To carry out repairs to engine components utilising Hand Techniques and machine tools in the form of Mills, Lathes, Grinders, VTL’s, and specialized equipment i.e. Plasma Spray, HP Water jet and Welding equipment etc
运用手工技能及设备，如打磨机，车床，磨具等和一些特殊设备，如等离子喷涂，高压水洗及焊接设备来进行发动机零部件的修理
？ Ensuring all parts is processed in accordance with the defined procedures and complies with dimensional and quality requirements
确保所有的工作都是按照规定的程序及依据质量要求来执行的
？ Utilising all types of standard or specialized gauges and hand tools as required by the repair activity
使用各类型的标准或特定的计量及工具来进行维修工作
？ To complete working cards and certify work accomplished
完成工作单上的工作及工作完成后的确认签署
？ To take part in and assist in process improvement activities
参与及协助进行流程改善工作
D) Aero Engine Test Cell Technicians
航空发动机测试技术员
Special Requirement:
● Engine Rigging and Testing experience. Experienced in disassembly/assembly of gas turbine engines. Familiar with engine manuals, technical publications, documentation and control procedures
具备发动机调校及测试经验，尤其是燃气涡轮发动机的拆卸及组装工作的经验。熟悉发动机维修手册，技术出版物，文件及控制程序
Responsibity:
？ To be part of an aircraft engine test cell team
成为发动机测试队伍的一员
？ To prepare, rig for test, trouble shoot, de-rig, and prepare for dispatch aircraft large fan gas turbine engines
大型燃气涡轮发动机测试前的设备准备，安装调校，测试，排故，设备拆卸及离场前的准备
？ Perform engine component visual and dimensional inspections
执行发动机零部件的目视及尺寸检查
？ To undertake aircraft engine repair activities
进行飞机发动机的修理工作
？ To complete working cards and certify work accomplished.
完成工作单上的工作及工作完成后的确认签署
？ To take part in and assist in process improvement activities.
参与及协助进行流程改善工作
E) NDT Technicians
无损探伤技术员
Special Requirement:
● PCN, NAS level 2 / 3, CAAC etc Approved. Experienced in NDT method, with experience in aviation industry would be preferred
持有PCN，NAS2级和3级，CAAC等的认证，拥有NDT经验，尤其是航空业经验者为佳
Responsibility:
？ To Perform NDT Inspection activities in the form of Fluorescent Dye Penetrant, Magnaflux, Eddy current, Ultrasonic and Radiographic Inspection
执行无损探伤的检查工作，例如：渗透检测、磁粉检测、涡流检测、超声波和X光线的检查
？ To complete working cards and certify work accomplished.
完成工作单上的工作及工作完成后的确认签署
？ To take part in and assist in process improvement activities
参与及协助进行流程改善工作
F) Aero Engine Overhaul Technician / Supervisor / Team Leader
航空发动机大修技术员/班长/组长
Special Requirement:
● With 3 years working experience in aero engine overhaul field or 5 years working experience in a manufacturing or maintenance environment in aviation industry
3年以上航空发动机大修经验或5年以上在航空业领域的制造或维修工作经验
● Good communication and interpersonal skills
良好的沟通和人际关系技巧
● With experience on process improvement techniques including six sigma and lean would be preferred
具有流程改善工具，包括六西格玛及精益生产的经验为佳
● With experience in thermal spray or welding, NDT methods, TIG welding etc, would be in advantage
具备使用热喷涂，无损探伤，或TIG焊接等设备经验的优先考虑
Responsibility:
？ To lead and assist teams of mechanics in the disassembly / assembly / Inspection and repair of large fan gas turbine engines, modules and components
带领和协助技工班组进行大型风扇发动机及其组件和零部件的拆卸、装配、检查及修理工作
？ To provide support to engineers and managers in the daily operational and technical duties, including resources utilization, 5S, process improvement and problem solving
在日常的运作和技术工作中向工程师和经理提供支援，包括资源的利用、5S、流程改善及问题的解决
？ Co-ordinate work schedule and supervise team activities to ensure efficient operation.
协调工作进度及督促班组工作以确保有效运作
？ To monitor and certify work is in compliance with airworthiness and company requirements
监督和保证工作符合适航条例及公司的要求
？ To train tradesmen and trainee in their repair activities
在修理工作中给技工和学徒提供培训和指导
？ Perform troubleshooting, modification and repair work, and undertake hand rework tasks
执行排故，改装，修理工作及承担手工技能工作
？ Perform engine component visual and dimensional inspection
执行发动机零部件的目视及尺寸检查
？ To complete working cards and certify work accomplished.
完成工作单上的工作及工作完成后的确认签署
？ To take part in and assist in process improvement activities
参与及协助进行流程改善工作
Contacts 联系方式：
Interested parties please send a full resume in Chinese and English with the copies of skill certificate and expected salary to the Personnel&Administration Department, Taikoo (Xiamen) Aircraft Engineering Co. Ltd, 20, Dailiao Road, East Gaoqi International Airport, Xiamen, 361006, P. R. China or alternatively, email to zhaopin@taeco.com. Please indicate the position you want to apply.
有兴趣者请将中英文完整简历及资格证书复印件，并附上期望的薪水值一同寄往中国厦门高崎国际机场东侧埭辽路，厦门太古飞机工程有限公司人事行政部,邮政编码361006 或电子邮件地址：ZHAOPIN@taeco.com.请注明你所应聘的职位。 |
|
鬼哭狼嚎笔记：A320课件︱Lesson 1
姑娘你没有什么理由不喜欢机务哥
CMM使用简介
线路施工航材和工具的查找
发表于 2008-10-13 10:41:15
